Palm Wax is a natural wax that gives you a crystallized effect on your finished candle. In this tutorial we will show the best technique to make Palm Wax Pillar Candles that helps maximize the crystal patterns in your finished…

  Paraffin and beeswax are probably the most common waxes to use to make dipped tapers. A soy wax, such as Ecosoya PB, may also be used for dipping tapers. The set up time for soy wax, between layers, is…

…double boiler method. A precision scale is the best way to accurately measure the wax. To determine how much wax is needed for your containers, try our Handy Calculator. Use a thermometer to monitor the temperature of the wax as…

…water solution Measure hard oils, melt measure soft oils Mix hard and soft oils Mix in lye and start blending Mix coloring Add fragrance, bring to trace, add color Pour into mold Line your mold. You can use just about…

…our Handy Calculator. You can use any wax for the filling of the mold. Melt the wax using the double boiler method. Step 2: While your wax is melting, secure your pre-tabbed wicks to the bottom of the mold using…

…wax. Tip: For a more vibrant, ghostly white, you can add Stearic Acid to increase the opacity of the wax. Step 3: Pour the wax into the mold(s) and allow to cool. As the wax cools, be sure to poke…

…keep container insulated. The slower the wax cools, the better the crystal patterns will come out. Step 4. Once your wax has melted and reached a temperature of 180-210 degrees F, add your fragrance and dye and mix thoroughly. Recommended…

An alternative to using mold sealer. Okay, so I’m sharing how I work my metal tape in hopes that it helps someone. This method has worked for me, without fail, saving me money on wasted tape and wax. I learned…

…your climate and humidity. Cut the soap base into small chunks and melt in the microwave. Step 2: Once the soap base is melted, add your desired fragrance and color and mix thoroughly. Step 3: Add the oil and stir…

…Once your wax is fully melted, add your desired fragrance and colorant and mix thoroughly. Pour your wax directly into the mold to the desired height. Save some wax for a second pour because the wax will shrink, forming a…