…Filigree Bee Soap Mold if you wish, to make a matching set! Step 5: Gently place the bubble wrap on top of the soap (immediately, before the soap begins to solidify) with the bubbles facing down. Press down lightly on…
…Filigree Bee Soap Mold if you wish, to make a matching set! Step 5: Gently place the bubble wrap on top of the soap (immediately, before the soap begins to solidify) with the bubbles facing down. Press down lightly on…
…way to do it. The largest obstacle in embedding photos in candles is probably getting the photos close enough to the surface so that you may clearly see what is depicted. In pursuit of getting photos to appear as clearly…
…your wax to completely cool before proceeding to the next step. This may take 3-4 hours. 4. Re-pour Wax When the wax has completely cooled, it will have shrunken a bit, leaving a sink hole that needs to be filled….
…about 1/2″ from the top of the mold. Leave some wax in the pouring pot for a later stage, but do not return it to the heat source yet. 7. Poke Relief Holes Allow to cool a bit until a…
…Crisco, or a light coating of petroleum jelly. Heat your soap and color as desired, then pour into the mold (I poured mine about 1/2 inch deep). After it has been poured, applying a quick spritz of rubbing alcohol to…
…allow the wax to cool from time to time between intervals of whisking, rather than continually whisking. This allows the wax to clump up a bit rather than having a softer, more frosting-like texture. Step 7: When you are satisfied…
Recent Comments