Wax melts, tarts, or cubes, are scented chunks of wax. They are placed into tart warmers, also called tart-burners, where the heat gently melts the wax and releases the fragrance. The scent lasts anywhere from several hours to several days. When the wax melt is exhausted, the remaining wax is discarded, and a new chunk of wax can be added to the tart warmer as desired.
In this tutorial we’ll show you how to make scented wax melt cubes. We’ll be making the tarts inside of a 6-cavity clamshell package. The clamshell packaging doubles as a mold in this example. This convenient packaging allows individual cubes to be broken off as needed.
Clamshells can be creatively labeled on the front for gift-giving, or retail display.
Each mold has 6 cavities, allowing individual chunks to be broken off as needed.
Wax Selection: Almost any kind of paraffin or soy wax will work for this. Avoid waxes that are really soft or sticky, as they will be difficult or messy to remove from the tart mold packaging. Harder waxes are generally easier to remove from the molds. Choose waxes with a melting point of 145F or less so that the cubes melt easily when placed into the tart warmer. The following waxes all work well for this:
Soft waxes, such as IGI-4627, IGI-4630, or IGI-6006, are poor choices by themselves because they will adhere to the clamshell mold, and be difficult to remove. These soft waxes will also tend to “flow” and become messy when the clamshells are stored in an upright position at warm temperatures. However, the softer waxes can be strategically mixed with some of the harder waxes to impart properties such as increased scent throw, increased fragrance loading potential, lower melting point, or single-pour characteristics (reduced wax shrinkage while cooling). Your climate and expected storage conditions should play a role in your wax selection.
In this tutorial, we selected a 50/50 mix of IGI-4630 and IGI-4625. The IGI-4630 is a soft container wax that has excellent scent throw and minimal shrinkage, but it is too soft by itself to mold into cubes. IGI-4625 is a harder pillar wax, intended for molded candles. The resulting blended wax is firm enough to make it easy to break off cubes as needed, but also possesses some of the single-pour characteristics of the soft container wax, minimizing the need to do re-pours. The procedure would be the same for other waxes, or wax blends.
To calculate how much wax you will need (or how many tart molds), expect 1 lb of wax to fill about six of the 6-cavity Break-Away Tart molds.
Add fragrance at 3-9% by weight. For a typical objective of 6% fragrance load, that comes out to about 1 ounce of fragrance oil added per pound of wax.
Items You will need:
- Wax
- Fragrance Oil
- Candle Dye
- 6-cavity Break-Away Tart Molds
- Pouring Pitcher
- Double Boiler (or some other safe means to melt your wax)
- Heat Source (we used an electric hotplate)
- Thermometer
- Mixing Utensil (wooden spoons are a favorite)
- Scale, for measuring wax.
Step 1. Measure your wax with a scale. To keep the math simple, we used a pound of wax.
Using a digital electronic scale to measure the amount of wax.
Step 2. Using a double boiler, or other wax melting setup, melt your wax to 175F.
Double Boiler: Indirect heat is used to melt the wax for safety reasons.
Wax melting within Double Boiler set-up. A pool of water surrounds the pouring pitcher.
Always monitor your temperatures with a thermometer. For this project, our target temperature is 175F.
Step 3. Remove the wax from the heat source and add dye, if desired. Mix thoroughly. We used liquid dye, but chips work equally as well.
Here we are coloring our wax with liquid candle dye.
Mixing the dye into the wax.
Step 4. Add fragrance oil as desired. We added 1 ounce of fragrance oil to our pound of wax, to achieve a 6% fragrance load. Mix thoroughly.
Stir well after adding fragrance oil.
Step 5. After adding dye and fragrance, your wax should be cool enough to go ahead and pour (150-160F) into the molds. You do not want to pour while the wax is too hot, as it can melt the tart mold. Try to pour as cool as reasonable, but also try to keep the temperature about 15-20 degrees F above the melting point of your wax. This will help to avoid jump-lines or other cosmetic blemishes.
Pour wax carefully into the break-away tart mold/clamshell.
Step 6. Allow to cool, and enjoy.
Allow the tarts to cool for an hour or two before handling.
Why do some wax melts seem to last longer than others? The temperature of the tart warmer is the single biggest factor to influence how long a wax melt will produce an effective scent throw. Some tart warmers get hotter than others. Tart warmers that get really hot will produce a higher intensity fragrance, but the fragrance will dissipate much sooner. Tart warmers that don’t get as hot tend to produce a less intense, but longer lasting aroma. Therefore, it is a tradeoff of intensity versus endurance.
Great tutorial! Will try this once moulds get here.
Do you keep pouring the wax till they’re connected to get that smooth back?
Yes, you kind of fill it up so the wax overflows into the neighboring cavities. It ideally results in that flat surface if all goes well. And, the user can then break off one or two cubes at a time.
What kind of wax do I buy to make wax tarts.
it says in this article
I’m a newbie to candle making. I was wondering how much in weight would I need to make 150 ml of wax.im using 30 ml pots and would like to make 6 (25mk ) pots at a time
Hi Sharon. It will take roughly 136 grams of wax to fit your total volume of 150 ml.
My melts are cracking. I have followed all the directions and tried different things but they are still cracking. Help!
mine also.
Cracking can be caused by several things. Either the wax is too hard of a wax (I put 3tsp of coconut oil in my soy wax) or they are cooling too fast. Also, environment has alot to do with pours. If you’re pouring in a cool room your tarts can end up looking horrible.ake sure your room is warm enough when pouring. In the winter time I always put a space heater in my work area due to the fact my house is pretty darn cold and uneven heat due to our heat source. Trial and error.
Can essential oils be used for the scent?
my wax melts keep cracking also. WHY???
Can I use the container that the original wax melts came in from the store ?
Yes, you should be able to for at least one or two uses. That would be a great way to recycle/up-cycle. Pour on top of something to contain spills, just in case it leaks.
Hi I new to candle making where can I buy fragrance and other things I need please
Can you just use old candles, shave them add dye and fragrance to make tarts interested in making favors for a upcoming wedding try to save
The soon to be bride some money, mother of the bride
combining used candles with dye and fragrance is an unpredictable recipe for fragrance. It is not worth cutting the corners for the poor quality in product you may get.
Hi I’m new to this wanted to make soy wax melts to sell how many pounds do I need to make a good batch I have the mold that is rubber like has 6 cubes per tray.