Add your own unique touch to regular container candles with fragrance and color combinations.
You will need:
- Glass Jar or Container
- Container Wax (IGI 4630 works great)
- Wick
- Any combination of candle dyes
- Fragrance Oil
- Pouring Pitcher
- Double Boiler or Wax Melter
Instructions:
1. Wick your container as usual. You may want to use a wick centering tool to keep your wick in place.
2. Melt your wax in a double boiler or wax melter.
3. Pour out enough wax to fill one-third (or one-half, depending on how many layers you want) of your jar into a pouring pitcher and add desired color and fragrance.
4. Fill your container to form the desired thickness of your first layer.
5. Allow the first layer to solidify, but do not wait for it to cool all the way to room temperature. It should still be warm when you proceed to the next layer.
6. Heat your wax for your second pour to the same temperature as the original pour. If you pour too hot, it can melt the first layer and cause streaking between the two colors. A good temperature to shoot for is about 165 degrees F.
7. Add any color and fragrance you like. Here, we used different colors with the same fragrance throughout.
8. Pour your wax to the desired thickness of the second layer.
9. Allow the layer to solidfy. If pouring additional layers, do so while this layer is still warm, but solid.
10. Pour your final layer and allow it to cool completely.
11. Remove your wick centering tool and trim your wick to about 1/4 inch.
Tip: Try playing with different thickness for a truly unique candle.
Do you warm the jars? I did my first double layer and they did not turn out pretty. I poured the first layer but I didn’t pour the second layer until they next morning. I heated the jar with a heat gun trying not to heat the section that was already poured. I ended up with white patches on the bottom layer? Just don’t know what went wrong. They looked beautiful after they set but the next day.. not so much.