Tips and Tricks

This page contains an assortment of useful tips, tricks, and tools for candle making.

Color Formulas

Color Formulas: Liquid Dye mixing suggestions.

Color Suggestions

Color Suggestions: Ideas for selecting the perfect color to match your fragrance.

Comparing Scent Throw

Comparing Scent Throw: Is my candle strong enough?

DIY Candle Lid

DIY Candle Lid: Here is a great way to make your own cute and inexpensive covers for candles that don’t have lids..

Do It Yourself Wax Melter

Do It Yourself Wax Melter: For easy bulk wax melting.

Handy Calculators

Handy Calculators: Use these tools to calculate how much wax you’ll need.

Metal Tape to Seal Molds

Metal Tape to Seal Molds: An alternative to mold sealer putty.

pillarpinlg

Pillar Wick Pins: Learn the secret to getting perfectly centered wicks using pillar wick pins.

Safe Containers

Safe Containers: How do you know if a container is safe for candle making?

votivepinlg

Votive Wick Pins: Learn the secret to getting perfectly centered wicks using votive wick pins.

Water Baths

Water Baths: How to set up a cool water bath.

Wick Centering Tools

Wick Centering Tools: Keep your wicks straight with these handy tools!

Scent Mixing Ideas

Scent Mixing Ideas: Need more scents? here are some scent mixing ideas.


11 comments on “Tips and Tricks
  1. paula taylor says:

    Need to know how to get the wax out of the mold after it cools.

    • administrator says:

      If the wax has completely cooled and is not coming out of the mold, put the mold in the freezer for about 10-15 minutes to allow the wax to shrink and then it should release from the mold.

  2. Twinkle Kabutarwala says:

    I made a candle and I always get a depression near the wick on the surface!!! Why does that happen!!!

    • administrator says:

      Hi Twinkle, Thanks for your question. You get that depression because wax shrinks as it cools. As it solidifies, it takes up less volume. This volume deficit presents itself as the depression you are seeing in the center of the candle. Some waxes do it less than others. The solution is to plan to do a small re-pour to top it off after the wax has cooled and solidified. Sometimes, you may need to do several re-pours, especially for larger candles.

  3. Tisha says:

    I’m having problems with my two 3″ x 6 1/2″ pillar molds, please help. My problem is that after I pour wax into them, it comes right back out after a few seconds or so. In less than a minute basically. I thought it was the mold sealer was too old, so I got newer. It still happened, figured the wick was to thin, so I got thicker wick. In 1 mold there is still wax at the very bottom of it as well. What do I need to do here. I’ve several different answers. And, I cannot buy new molds at all, and I have a big order need them for.

    • administrator says:

      Hi Tisha, that sounds frustrating. It sounds like after you fill the mold with hot wax, it is leaking out thru the wick hole? This can happen if the wax is too hot. Try lowering the temperature that you are pouring your wax at. Try 160 degrees F or 70 degrees C, or even lower if it is still leaking.

  4. Danny says:

    I am making candles and the base area keeps dropping inside the candle leaving a crater like hole in the middle, any tips to help keep it solid?

  5. Dave S. says:

    Hi. Want to make a candle that ‘bleeds’ red when melting. I want to use soy wax. It’s a skull mold that I want the outer ‘shell’ white soy wax and the center be filled red so it seeps blood-like when melting. Can’t figure out how to pour the wax in the center without melting the outer shell. Do you any techniques to doing this process? Thank you.
    -Dave S.

    • administrator says:

      What I would do, Dave, is make the interior how you want it (blood red). Then, once you have made those molded interiors, dip them in un-dyed soy. The opacity of the soy will cover up the color of the interior. Dip it a several time until you get a shell thick enough to your liking.
      Kind regards,
      Alan

  6. parisa says:

    hi dear
    I have tried few times to make 3 layer candle, I have few problems, after the first layer it gets white in the edge although I choose deep red and it does not seem nice, what is your sugestion? the second problem is combination of second and first layer, I dont like to have mixed the colors but it happens,I would be so thank ful for your reply

  7. Andy says:

    My candles seem to turn out well at the end physically but they soy wax doesn’t seem to hold the scent of my essential oils well. I’ve used higher and higher drops but nothing. Can’t smell them at all after they’re dried and there are air bubbles when pouring.

    Help.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

Candle Making

candle making instructions

Whether you are a seasoned pro looking for inspirational ideas, or a budding candle maker, our step-by-step tutorials will walk you through numerous candle making projects.

Bath & Body

bath body soapmaking

Here we have a number of different demonstrations and projects for soap making, as well as other bath and body products.

Fragrant Living

Fragrant Living Projects

Who doesn't like things that smell good? Here are a few other projects that might interest you.